package-comments


  • 0ad

    Return to List
  • Shuts down: not enough power to run. Requires Open GL drivers to be activated in Raspi-Config. 1Gb RPI3 Not enough memory to run.

  • 3dchess

    Return to List
  • no instructions simplistic graphics

  • aegisub

    Return to List
  • aegisub itself works quite well. The audio sound part works okay. When I try to load video a square white box shows up and the program hangs. There does not seem to be a crash report in the crash file. A look in the config file shows that 'ffmpegsource' is the video player for the system. I can't verify that ffmpegsource is installed but some aegisub documentation says it is installed in the normal installation. ffmpegsource is another name for 'ffms2'. There is a ffms2.lib but no executable. There might be a need for the ffmsindex package to be installed as there is an .index file in the .aegisub-2.1 directory but I'm not sure I was able to install this package of the raspian archive

  • alacarte

    Return to List
  • Just doesn't work even though package manager says it's the latest version. Has this ever been tested?

  • aldo

    Return to List
  • requires the installation of the libao library

  • alsaplayer-jack

    Return to List
  • Works fine on Ubuntu. Will not install on raspbianW with wolfson drivers owing to unmet dependency on libc6-dev

  • amarok

    Return to List
  • Crashes when attempting to play music.

  • armagetronad

    Return to List
  • This game required the Open GL Drivers to be activated in Raspi-config, other wise it is very slow. Best on a RPI3

  • bandwidthd

    Return to List
  • Working 100%

  • beep

    Return to List
  • no sound is produced. It still looks for the pc mother board hardware speaker driver. Requires rewrite to work with the ARM hardware.

  • beneath-a-steel-sky

    Return to List
  • Considered one of the best point and click adventures of all time. Works perfectly on the Pi.

  • billard-gl

    Return to List
  • Open GL drivers required shows error: Couldn't find no matching GLX Visual

  • blender

    Return to List
  • Segmentation fault after munmap

  • briquolo

    Return to List
  • Segmentation fault

  • bzflag

    Return to List
  • Open GL drivers required shows error: Couldn't find no matching GLX Visual

  • celestia

    Return to List
  • Error: Gdk Glext Warning - Window system does not support OpenGL

  • childsplay

    Return to List
  • Enjoyable learning program though the range of activities has a wide age range

  • chirp

    Return to List
  • This is a VERY OLD version of CHIRP and doesn't support many of the radio models available in later releases. I sure would love an updated compile... thanks KK4SZO

  • Did not work, no parameters for ICOM 761

  • Runs Well


  • Install Chirp from Synaptic and works perfect

  • cython

    Return to List
  • can't install on stable. The following packages have unmet dependencies: cython3 : Depends: python3 (>= 3.3~) but 3.2.3-6 is to be installed Depends: python3:any (>= 3.3.2-2~)

  • dicomscope

    Return to List
  • It is a simple and very fast application to view DICOM images.

  • direwolf

    Return to List
  • Have been using Direwolf V1.1 and V1.2 for quite some time, especially for HF. Works very well. It is also possible to use Direwolf for both VHF and HF with two ports and transceivers.

  • Works pretty much flawlessly on Pi2 or Pi3

  • dropbear

    Return to List
  • need update

  • enigma

    Return to List
  • works like charm on a pi 2

  • Works beautifully on a Pi-2


  • This package runs near 100% cpu load.

  • Installation and setup no problem. The major problem is to find an usb-stick which ist working together with raspian and the raspberry. Never I see a signal on the waterfall .... 73 de Klaus - dj9km

  • flrig

    Return to List
  • Other than apt-get could not find the app everything did not work perfectly. Why is this app even listed if it does not exist? Response: flrig is only available on the Jessie distribution of Raspbian via get-apt. If you are using Wheezy it is not available. If a package is available on Wheezy the version number will be shown as Whez(#.##) in the listing

  • gimp

    Return to List
  • A well featured graphics editor basic tools work well using advance options and large images will be slow.




  • grig

    Return to List
  • It is no HamRadio Deluxe

  • hamfax

    Return to List
  • with the work around help of Ragna Jensens .asoundrc is a receiption possible. "element14.com/community/message/107289/l/re-pjsippjsua-with-wolfson-audio-card#107289" The cpuload acts by 50%, maybe little less. On my rpi I have to restart the receiption several times until the spectrum graph activates. The copy is very slant and without heavy correction not readable. Maybe an unproper sampling rate is the reason of heavy slant and several restarts of receiption.

  • hedgewars

    Return to List
  • Too slow!!! 0-2 fps :( Too bad one of the greatest games demand too much from Pi...

  • inkscape

    Return to List
  • works fairly well, although a bit too heavy on the cpu to be able to be used for any serious projects.

  • kaffeine

    Return to List
  • With DVB-T Stick Input too slow

  • kate

    Return to List
  • Just installed. Most works. Sessions are not saving but files do. Kate has been a favorite of mine for years becauce you can have many documents open at once and the tabs help keep track of them. I use Kate mostly for programming. It recognizes multiple program languages and has many features.

  • kexi

    Return to List
  • Errors on installing Calligra-libs. Tried all ways to install, Synaptic, Manually still same problems. Removed all other KDE packages from pi 3. Tried everything. It breaks packages every time whether I install all of Calligra or just Kexi part. I installed it on my laptop (not PI) and it works fine!

  • leafpad

    Return to List
  • it's like nano

  • libreoffice

    Return to List
  • Works well on the Raspberry Pi. Can be used for homework and home use. Impress struggles a little if lots of graphics are used but a very usable office suite for the Raspberry Pi which allows you to use files from school and work.

  • linpsk

    Return to List
  • It needs a tuning indicator

  • milkytracker

    Return to List
  • Very nice audio/sample editor. Works like a charm!!!

  • mypaint

    Return to List
  • i dont get any error on install painting is fluid with wacom tablet on raspberry pi 2 and raspbian

  • netpanzer

    Return to List
  • It's a good game, not too fancy graphics, so it has a high fps, and it works well!

  • netperfmeter

    Return to List
  • When trying to connect with sctp to netperfmeter server on Ubuntu ERROR: Failed to add flow to remote node. Vice versa (passive on RaspPi) it's working

  • neverputt

    Return to List
  • Open GL drivers required shows error: Couldn't find no matching GLX Visual

  • pinball

    Return to List
  • Error: Couldn't find no matching GLX Visual

  • remmina

    Return to List
  • Works perfectly!

  • simple-scan

    Return to List
  • Works well with my Canon LIDE 30

  • snake4

    Return to List
  • it won't open

  • thrust

    Return to List
  • Appears in menu but fails to run.

  • toppler

    Return to List
  • A good remake of Nebulus an enjoyable platform puzzle game. I use to play this on the C64 and Amiga. It works well on the Pi

  • Best Remake of Nebulous I've ever played. Great Effort. The underwater/bonus level is a bit difficult but I think that was like that in the original.

  • tuxpaint

    Return to List
  • A fun learning paint programs for small children has fun sounds and lots of picture brushes and effects to keep them happy for hours.

  • wings3d

    Return to List
  • It opens up the interface, but doesn't show the actual 3D graphics canvas. That part is just blank and nothing happens there, except for flickering if you take your mouse over there. (OpenGL driver active)

  • wsjt

    Return to List
  • GUI opens up then closes




  • xgalaga

    Return to List
  • Open GL drivers required shows error: Couldn't find no matching GLX Visual
Last modified on Friday, 14 April 2017 09:17

Additional information