Hardware Addons

Hardware Addons (15)

Additional hardware for the Raspberry Pi to enhance it's capabilities, including GPIO programming.


The TSL2561 Luminosity Sensor is used to measure ambiant light levels more accuratly and across a wider range of light levels than a Light Dependant Resistor or LDR.

PiCapture is a video capture card that uses the CSI camera port allowing it to use the Raspberry Pi's fast graphics processor for video capture instead of the cpu.

SEQUITUR is a real-time locating and communication system. SEQUITUR Ranging allows measuring within a few centimeters the distance between devices that can be hundreds of meters apart. SEQUITUR InGPS allows locating mobile users outdoors and indoor, with an accuracy within a few centimeters.

The PiFace digital is a GPIO add-on board for the Raspberry Pi which allows you to connect lights, switches, motors and sensors to be used with program's written with Scratch, Python or C.

A new Raspberry Pi expansion board is available by the designer of the Gertboard called the GertDuino. The GertDuino is a GPIO add-on board that works like an Ardino-UNO board plus offers extra features.

The Gertboard is a GPIO expansion addon card for the Raspberry Pi for connecting and controlling real world devices such as sensors, motors, relays and switches.

The RaspiRobot GPIO board kit allows a motor, switches and sensors to be used with the Raspberry Pi

The Pi NoIR is a Raspberry Pi camera module with no Infrared filter for night time and low light photography using an Infrared light. Useful for wildlife research, science projects, night time security or making artistic photo's.

TNC-Pi is a terminal node controller device, GPIO add-on board used by amateur radio operators to participate in AX.25 packet radio networks.

The Raspberry Pi Camera Module is a 5 mega pixel add-on board that can be used for taking photos and high definition 1080p video which attaches to the Raspberry Pi's Camera Serial Interface (CSI).
Page 1 of 2

Additional information