Report comment

Graeme,

even after reboot hotspot not working. I am getting this error even after reboot and execute manually the script as well.

I found the following line causing this issue(from the hotspot script)

ip a add 192.168.50.5/24 brd + dev "$wifidev"

After searching the google i added the below line before the above mentioned line

sudo ip addr flush dev "$wifidev"
ip a add 192.168.50.5/24 brd + dev "$wifidev"


Even after the above lines added hotspot is not coming up, but script doesn't show any failure messages.

Then i checked in /var/log/messages , i found the below errors.

Nov 7 18:29:27 raspberrypi kernel: [ 11.371527] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Nov 7 18:29:27 raspberrypi kernel: [ 11.371541] brcmfmac: power management disabled
Nov 7 18:29:28 raspberrypi kernel: [ 11.454911] nf_conntrack version 0.5.0 (15360 buckets, 61440 max)
Nov 7 18:29:32 raspberrypi kernel: [ 16.124774] fuse init (API version 7.26)
Nov 7 18:29:34 raspberrypi vncserverui[823]: Failed to load module "gail"
Nov 7 18:29:34 raspberrypi vncserverui[823]: Failed to load module "atk-bridge"
Nov 7 18:31:20 raspberrypi kernel: [ 123.655820] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Nov 7 18:31:20 raspberrypi kernel: [ 123.655854] brcmfmac: power management disabled
Nov 7 18:31:34 raspberrypi kernel: [ 138.283092] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Nov 7 18:31:34 raspberrypi kernel: [ 138.283106] brcmfmac: power management disabled
Nov 7 18:31:38 raspberrypi kernel: [ 141.987507] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Nov 7 18:31:38 raspberrypi kernel: [ 141.987540] brcmfmac: power management disabled

Could you suggest how shall i proceed on this?