Report comment

Hi Agustin, This setup can be used as a permanent hotspot, not the normal way to do it but does work.
You will need to complete the guide and followed all instructions as the autohotspot script contains the setup for the hotspot.
Then to make it always go to hotspot put a fake ssid in this line
#ssids=('mySSID1' 'mySSID2' 'mySSID3')
so it shows
and remove the #, you need to also put a # infront of the 4 commands above this line.
#wpassid=$(awk ........
#IFS=$IFSdef #reset back to defaults

You will still need to disable the hostapd and dnsmasq services.

This way it will not look at the wifi networks set up on your rpi so will always go to a hotspot at boot up.