Report comment

Hi, I have faithfully followed your tutorial on my Raspi3, but it doesn't work! My Windows laptop can see my AP, but on connecting, it says Buccaneer secured no internet. O the Pi's bar in the desktop, the symbol is the wifi wave and not the 2 arrows you mention. If I stop the hostapd service and then use hostapd -B /etc/hostapd/hostapd.conf, I get:
pi@CaravanPi:~$ sudo hostapd -B /etc/hostapd/hostapd.conf
Configuration file: /etc/hostapd/hostapd.conf
Failed to create interface mon.wlan0: -95 (Operation not supported)
wlan0: Could not connect to kernel driver
Using interface wlan0 with hwaddr b8:27:eb:d7:dc:41 and ssid "Buccaneer"
wlan0: interface state UNINITIALIZED->ENABLED
wlan0: AP-ENABLED

I am happy to ignore the mon.wlan0 error as Broadcom don't support monitor, but I don't like the "could not connect to kernel driver". This sounds nasty. Do you get the same?

If it isn't the AP, then it must be the routing. Is there any way to check this?
All worked fine under jessie but I am tearing my hair out with stretch!!
Any help would be most appreciated.
Brian